WHALE_EP1632 Whale Watermaster® IC Controller service kit pump, hose and Easi-Push™
Original Whale product
Watermaster® IC pump controller kit
The Watermaster IC unit intelligently controls the submersible pump for trouble free operation and peace of mind. Never adjust your pressure switch again!
- Whale Watermaster IC is compatible with and easily retrofitted to a Whale Watermaster pressure switch socket and a Whale Watermaster high flow pump only
- Stops the pump pulsating at high voltages
- Stops the pump running continuously at low voltages
- Detects when the water container has run dry and turns pump off
- Surge damper no longer required
- Protects and prolongs the submersible pump
- Helps lengthen battery life
- Built-in fault diagnostics system
- Service free, one-step calibration process
Kit includes:
- Watermaster IC unit
- Watermaster High Flow submersible pump
Tecnical information:
Voltage:
- Voltage range 9.5V d.c. to 14.5V d.c. (normal operation)
- Voltage range 8.5V d.c. to 9.5V d.c. (limited operation)
- Fuse Size :5 amp / automotive
- Nominal Current: Operating 3.7 amps, Standby 0.007 amps
- Operating Temperature Range: 3°C to 40°C
- Storage Temperature Range: -30°C to 60°C
Materials:
- Pump body: ABS
- Seals: Nitrile®
- Strainer: Polypropylene
- Impeller: PBT
- Cable: PVC, Seal: Nitrile®
- Wire: PVC insulated copper
- Hose: PVC
- Plug: PBT
- Watermaster IC: Polycarbonate
Performance:
Max Discharge Head: Flow rate / Current draw at 12V d.c.
0 m (0ft): 15.8 ltrs/min (3.8 amps)
1 m (3ft): 14.8 ltrs/min (3.7 amps)
3 m (9ft): 12.8 ltrs/min (3.5 amps)
Parola chiave
766478946874
Numero articolo: WHALE_EP1632
Codice a barre: 766478946874
Peso incl. confezione: -grammi
Peso netto: - gram
Outer weight: - kg
Quantità per scatola esterna: 15
Quantità per scatola interna: -
Quantità per pallet: -
Articolo imballato: - mm
Dimensione scatola interna: - mm
Taglia esterno: - mm
CBM scatola esterna: - m3