550118 Batteriladdare 12V/24V 15Amp.

Technical parameters:
Input: AC 220 - 240 V, 50 Hz, 190 W
Output: DC 12.5 V 10.5 A/25 V 5.2 A
Max: 15 A (R.M.S.)

General:
- Convenient operation
- Adjustable charging current
- Analog panel meter to monitor the charging process
- If the battery is over-charged, the charger will switch into its over-charging protection
- If short-circuit happens, the charger will switch off itself, and return to normal after a few minutes

Operating instructions:
Connect the red clamp to the positive (‘+’) terminal of the battery, and the black clamp to the negative (‘-‘) terminal. Be sure that the two clamps don’t make contact with each other. Insert the mains plug into the wall socket. The battery is now being charged. To remove the battery charger: first pull out the mains plug from the wall socket and then remove the clamps from the battery terminals.

Important:
FOR 12 V AND 24 V LEAD ACID BATTERIES (30 H - 300 AH) ONLY
- Unit must operate from AC 220 V - 240 V supply
- To avoid short circuit the red clip and black clip should not touch each other during charging
- When disconnecting the charger, first pull out the mains plug before removing the clamps from the battery terminals!
- Store and use the charger in a dry and well-ventilated area
- Not suitable as a drip feed charger

Nyckelord